PLASTIC PLYWOOD SHEETS
FOR CONSTRUCTION

LONG LASTING, VERSATILE, DURABLE

Plastic plywood sheets for construction, Ekoplak has been developed as an alternative to plywood boards, one of the most consumed supplies on any job site. EKOPLAK is more durable, could be used in every weather condition, has a longer life span and since it is completely recyclable it has a very low environment impact.

  • 1 sheet EKOPLAK: 1,220 x 2,440 x 18 mm / 4’ x 8’ x ¾”
  • With its ideal size it guarantees maximum productivity, it could be used together with 18 mm standard plywood boards
  • It is PP based, hence has smaller and more pores
  • It has a high impact resistance, won’t break due to drops etc.; please click for impact resistance video
  • Because concrete does not adhere to the polymer surface it won’t stick during removal
  • Could be cut and nailed (60 mm recommended) just like plywood boards
    Contrary to plywood boards, there is no scratch-induced deformation problem
  • Could be used for columns, walls, slab and beams. Because it takes its original shape after bending, it is ideal for circular wall uses
  • Could be stored in every environment, goes unaffected by adverse storage conditions (water, moisture, insects, etc.)
  • Resistant to all weather conditions
  • Because it is recycled on kilogram basis, even the smallest piece gets not wasted
  • Long life span; the minimum life expectancy is 3 years even under most severe conditions

CLICK HERE FOR BROCHURE

An Ekoplak falling from 5 m. It has high impact resistance, won’t break due to drops etc.; please click for the impact resistance video.

Frequently Asked Questions - Plastic Plywood Sheets for Construction

Can I cut Ekoplak?

Yes, it could be cut easily. You may cut it with any regular circular saw. However, instead of cutting the product, we advise to use plywood pieces on the edges, thus making the product more efficient and allowing it to be used for a longer period of time.

Can I use it for column as well as wall formworks?

Yes, it could be used for both purposes. If the grid support on the back of the panels matches laboratory results then the panels could be used in horizontal or vertical directions with confidence.

Can I hammer a nail into this product?

Yes, you can do all the applications on plywood also on Ekoplak.

Could it be recycled?

Yes, Ekoplak is made of polypropylene. We may get them back depending on the conditions of the product, or they could be sold as scrap to recycling companies by the kilo. Please contact us for more detailed recycling options.

Can I use it with plywood?

Yes, you may. Because Ekoplak has a thickness of 18 mm, it could be easily used with standard 18 mm plywood.

Does it gets affected by water or humidity?

No, Ekoplak goes completely unaffected by water or humidity. It could be stored in every environment.
Please fill in all relevant fields. We will contact you as soon as possible.
*
*
*
  • ABS Yapı Elemanları San. Tic. Ltd. Şti.
  • Aydinevler Mahallesi, Sanayi Cad. Nº: 3/Z03 Istanbul - Turkey

Ekoplak - Plastic Plywood Sheets for Construction USA Branch: T: (561) 493-9900 sales@utilitysupplyassociates.com 140 Commerce Road Boynton Beach, FL 33426